Garage Door Repair Made Simple
So, you can’t open the garage door one more time. Looks like you can’t delay any longer that garage door repair you have been postponing for weeks. If you are lucky, you won’t have to replace the entire door. Here you will find some advice on how to get those garage doors to work properly and save you some aggravation.
More often than not, buying new garage doors is not necessary. Normally, you can fix it yourself. All you need is know exactly what is not functioning so you can correct the problem. Some parts may need replacement. Therefore, if you get into the habit of examining your garage door regularly, you will save a lot of money. You may spend a bit on repairs but it is nothing compared to buying a new door.
The first thing you will want to do is check the condition of the metal tracks and rollers for loose screws and dirt found on conventional garage doors. A garage door will open more smoothly if its rollers run over sturdy, well shaped and unobstructed tracks. Also, examine the rollers carefully, making sure they are clean and in good condition. Rollers do deteriorate with time and may need to be replaced.
With continued usage, the tracks and rollers develop a thick, viscous matter which should be removed. This guck on the sliding mechanism of the door adds friction and in turn slows done the passing of the rollers on the tracks, making it difficult to roll the door open. You can remove this sloppy substance with soap used for washing dishes.
The tension springs and the pulley mechanism of your garage door are also important to check out. Sometimes, all you need are these to be readjusted and your door will roll in and out like new. However, there are other times when you really need to replace the springs and/or the pulley system.
There is much you can do to repair your garage doors, but there are times when you should definitely leave it to the professionals. One such instance is when your main garage spring needs fixing or replacing. The reason for hiring a professional for this task is that it can be dangerous to manipulate these alone. The tension in the springs is simply too high.
You should not only examine the rail mechanism of your garage door, but also all the hardware involved, such as the hinges. You might only need to tighten a loose hinge to get your door to work properly.
Another part that needs to be examined is the door opener. Are the batteries dead? Perhaps you really need to replace your door opener. However, if you do replace it yourself, be certain to get a door opener that can be used without having to modify your garage door.
As a final note of advice, always see what you can do to repair your garage door first, and then shop around for a new door. You can always choose your door but it is recommended that you get it installed by a reputable garage door installer.
When it comes to garage door installation you can have it done professionally if you have more money than time. The same applies to garage door repair, though things like springs can be dangerous as a DIY repair.